As camping continues to grow in popularity we need to start rethinking this essential part of being outdoors.
The Trailblazer is designed to pack small so it can go anywhere you do; while its patented design keeps your campfire off the ground to prevent leaving burn marks behind even on the most sensitive surfaces.
Order nowWe’ve done our small part in bringing thousands of friends and families together and helped minimize the impact of an estimated 100,000 campfires in North America last year alone with the Trailblazer. As our journey continues your input has been essential.
We get it, space and weight are a premium and we'd all rather carry one thing than two, that's why The Trailblazer was specifically designed to double as a fire pit and grill.
Order nowWe pushed the limits of material engineering and design to get the Trailblazer's weight down to just 1.4kgs. When packed, the Trailblazer is about the size of a standard thermos, but its intuitive design opens up much like a camp chair to host a 30cm x 30cm" burn area, perfect for 1-4 people.
We never know where your adventures might take you, thats why the Trailblazer was designed to exceed all Federal Fire pit regulations.
Whether its tucked into your Kayak or on the back of an ATV
the Trailblazer allows for safe, leave-no-trace fires wherever
you decide to go.
The Trailblazer's patented Fire Mesh allows for perfect airflow
into your coals for nearly smokeless burns. Burn wood, charcoal, or wax logs without hassle.
Constructed of SGS Certified Food-Grade 304-stainless steel, Tri-fold design, and can support up to 20-lbs of weight.
The Fire Mesh sits at the heart of the Trailblazer. The stainless steel mesh is what your fires and fuel will burn on top of. The Fire Mesh's woven screen ensures 99% ash containment.
Anodized aluminum and stainless-steel rivets make up the frame of the Trailblazer
The Heat Shield, constructed of Aluminum Fiber Glass and high temperature resistant hook & loop straps. Use the heat shield when burning on sensitive surfaces like grass, wood decks, or public lands.
Constructed of ballistic nylon the carrying case features a heavy duty YKK zipper and adjustable strap, & the inside of the bag is coated in a urethane for easier clean up and increased durability.
The scalloped aluminum Ember Guards safely contain and control your fire, preventing hot coals from rolling out of the pit onto the ground.
Car camping? Bring your cast iron and boil that pot of coffee at the same time, with room to spare.
The Trailblazer's grill features an 28cm x 28cm design that allows for easy use with multiple pots and pans, and can hold up to 9kgs of weight.
The Trailblazer prides itself on its simplistic yet rugged design. There are no fasteners or bolts to lose and no tools to fumble with at night.
The Trailblazer's patented cross-braced design gives it a low center of gravity for stability on windy nights or elevated surfaces.
Open your Trailblazer frame to its fully seated position.
Pay close attention to which Ember Guard has the badge, this should be set aside until Step 3. Two Ember Guards should be placed on the frame parallel from one another. Guide the upright pole of the frame through the pre-cut holes in the Ember Guards.
Repeat Step 2 with the remaining two Ember Guards. Note that the Ember Guard with the badge should be put on in this step
Holding the Fire Mesh with the folded edges facing down, each of the four grommets should be placed over the upright poles of the frame. Take care to not let any one corner drop too far down the uprights. Once the uprights are through the grommets slide the Fire Mesh down as one unit until the Fire Mesh is fully seated on top of the Ember Guards.
Proper care is required to keep your Trailblazer performing optimally, be sure to read all of these instructions carefully to ensure years of use out of your Trailblazer
Stainless steel grill grates tolerate intense heat and are rust resistant. It typically only takes a quick brush to keep them clean.
Before packing up and storing your Trailblazer you should ensure that all ash is removed from the Fire Mesh. This should be done by rinsing the mesh after each use. Any excess ash left on the Fire Mesh may degrade the stainless steel over time.
Note: Discoloration is to be expected after use, this is not removable.
Any soot build up can be removed by rinsing with a light detergent. A nylon brush may be use on heavy build-up.
Note: Fires should always be kept at least 1-inch away from your Ember Guards to ensure proper airflow.
Ensure the Heat Shield is always kept at least 4-inches away from the bottom of the Fire Mesh. Placing the Heat Shield too close to the Fire Mesh will cause damage.
Note: The Heat Shield is fire resistant and not fire proof.
No additional care is needed. WD-40 can be applied to contact points on the frame to ensure smooth opening and closing.
The Trailblazer comes with a lifetime guarantee on its Frame, Ember Guards, and Folding Grill.
The Fire Mesh comes with a 50 fire or 1 year guarantee.
Replacements are available for $14.95 and refresh this warrantyIf you are not satisfied with your Fireside Outdoor product you may return it for a full refund within 30 days.
All orders placed before 12pm PST ship same business day via UPS Ground.
Your cart is currently empty.
Continue browsing here.
