Backyard Fire Pit Bundle

Includes Pop-Up Fire Pit & Ember Mat
  • 100%
    Worry-Free Fires
  • 60 Sec
    Set-Up
  • 13lbs.
    Total Weight
Order now

The Pop-Up Pits Heat Shield reflects 99% of heat back into the firepit

Enjoy A Worry-Free Campfire

Stop Popping Embers

The Ember Mat catches any popping embers from your fire pit preventing any unwanted damage to the ground.

Campfire regulations are changing rapidly across the United States and in the rest of the world. Federal regulations are moving away from in-ground campfires and cooking due to the mess they leave as well as the irreparable harm they do to the fire pit area. Get ahead of the curve and make sure your fire pit is meeting the regs anywhere adventure might take you. 

The Pop-Up Pit is designed to pack small so it can go anywhere you do. Its patented design keeps your campfire off the ground to prevent leaving burn marks behind even on the most sensitive surfaces.

PORTABILITY REDEFINED

SPACE AND WEIGHT DO MATTER

We get it, space and weight are a premium, thats why we designed the Pop-Up Pit to pack down to the size of a camping chair. Its aerospace inspired design priotizes weight and durablity above all else giving the Pop-Up Pit a final packaged weight of just 7.8 lbs. adding the Ember Mat Ups this total kit weight to just 13lbs. 

Order now

A GREAT FIRE ANYWHERE ANYTIME

The Fire Mesh sits at the heart of your Pop-Up Pit. Made from a fire-rated stainless steel alloy, the Fire Mesh is woven tight enough to keep ash contained to your pit while still allowing air to come in from underneath.

This means your fires burn hotter, brighter, and with 80% less smoke.

Order now

SIMPLE IS BETTER

The Pop-Up Pit prides itself on its simplistic yet rugged design. There are no fasteners or bolts to lose and no tools to fumble with at night.

The Pop-Up Pits patented cross-braced design gives it a weight capacity of 125 lbs and a low center of gravity for stability on windy nights or elevated surfaces.

  • No fasteners or bolts No fasteners or bolts
  • cross-braced design cross-braced design
  • low center of gravity low center of gravity
  • stable construction stable construction

ASSEMBLING YOUR Pop-Up Pit

01 step

Your Pop-Up Pit may feel ‘stiff‘ upon first use, this will subside after your first fire.

Open your Pop-Up Pit frame to its fully seated position.
Open your Pop-Up Pit frame to its fully seated position.

02 step

Your Pop-Up Pit will come wrapped with straps, keep these as they will aidin storage and packing in the future!

Pay close attention to which Ember Guard has the badge, this should be set aside until Step 3. Two Ember Guards should be placed on the frame parallel from one another. Guide the upright pole of the frame through the pre-cut holes in the Ember Guards.
Pay close attention to which Ember Guard has the badge, this should be set aside until Step 3. Two Ember Guards should be placed on the frame parallel from one another. Guide the upright pole of the frame through the pre-cut holes in the Ember Guards.

03 step

If you are having trouble applying the Ember Guards or Fire Mesh WD-40 can be used on the upright poles for lubrication.

Repeat Step 2 with the remaining two Ember Guards. Note that the Ember Guard with the badge should be put on in this step
Repeat Step 2 with the remaining two Ember Guards. Note that the Ember Guard with the badge should be put on in this step

04 step

Holding the Fire Mesh with the folded edges facing down, each of the four grommets should be placed over the upright poles of the frame. Take care to not let any one corner drop too far down the uprights. Once the uprights are through the grommets slide the Fire Mesh down as one unit until the Fire Mesh is fully seated on top of the Ember Guards.

CARE AND MAINTENANCE

Proper care is required to keep your Pop-Up Pit performing optimally, be sure to read all of these instructions carefully to ensure years of use out of your Pop-Up Pit

Grilling Grates

Stainless steel grill grates tolerate intense heat and are rust resistant. It typically only takes a quick brush to keep them clean.

Fire Mesh

Before packing up and storing your Pop-Up Pit you should ensure that all ash is removed from the Fire Mesh. This should be done by rinsing the mesh after each use. Any excess ash left on the Fire Mesh may degrade the stainless steel over time.

Note: Discoloration is to be expected after use, this is not removable.

Ember Guards

Any soot build up can be removed by rinsing with a light detergent. A nylon brush may be use on heavy build-up.

Note: Fires should always be kept at least 1-inch away from your Ember Guards to ensure proper airflow.

Heat Shield

Ensure the Heat Shield hangs about even with the ‘X’ brace of the Pop-Up Pit, ~5-6 inches below the heat shield.

Placing the Heat Shield too close to the Fire Mesh will cause damage.

Note:  The Heat Shield is fire resistant and not fire proof.

Pop-Up Pit Frame

No additional care is needed. WD-40 can be applied to contact points on the frame to ensure smooth opening and closing.

Ember Guards

The scalloped aluminum Ember Guards safely contain and control your fire, preventing hot coals from rolling out of the pit onto the ground.

Fire Mesh

The Fire Mesh sits at the heart of the Pop-Up Pit. The stainless steel mesh is what your fires and fuel will burn on top of. The Fire Mesh's woven screen ensures 99% ash containment.

Heat Shield

The Heat Shield, constructed of Aluminum Fiber Glass and high temperature resistant hook & loop straps. Use the heat shield when burning on sensitive surfaces like grass, wood decks, or public lands.

Carrying Case

Constructed of ballistic nylon the carrying case features a heavy duty YKK zipper and adjustable strap, & the inside of the bag is coated in a urethane for easier clean up and increased durability.

Collapsible Frame

Anodized aluminum and stainless-steel rivets make up the frame of the Pop-Up Pit.

thoughtfully designed

Each part, piece, and connector of the Pop-Up Pit was custom engineered and crafted to create a fire pit that is ultra-portable, environmentally responsible, and an overall better campfire experience.

Final overview

  • Warranty:

    The Pop-Up Pit and Ember Mat come with a lifetime guarantee. 

    The Fire Mesh comes with a 50 fire or 1 year guarantee.

    Replacements are available for $19.95 and refresh this warranty
  • Money-Back Guarantee

    If you are not satisfied with your Fireside Outdoor product you may return it for a full refund within 30 days.

  • Same-Day Shipping

    All orders placed before 12pm PST ship same business day via UPS Ground.

  • Packed Size 27"x 6"x 6"
  • Pop-Up Pit Opened Size 24"x24"x15"
  • Ember Mat Opened Size 67" x 60"
  • Kit Weight 13 lbs
  • Set-Up Time 60 Seconds
  • Cool Down Time 90 Seconds Due to the Pop-Up Pit's design it cools down in 90 seconds after your fire has been extinguished
  • Materials 304 Stainless Steel and Aircraft Aluminum
  • Meets Federal Fire Pan Regulations? Yes
  • Price $169.95 ($20 Bundle Savings)

Shopping Cart

Your cart is currently empty.

Continue browsing here.